High-Performance Warehouse Floor Coatings

Floor cracks, tiny rents, increased slip potential, decreased hygiene — these are a few signs that warehouse floor coatings are falling apart. The facility must then take the necessary steps to restore the coatings system back to its former good condition. The search is on for the highest-performing coatings to restore warehouse floors.

The search is easy in today’s age of technological advancements. Coatings have been improved to amazing levels, allowing facility managers the freedom to choose from a variety of high-performance warehouse floor coatings. The market is now filled with advanced formulations with modified chemical properties. Super-paints that bond well, harden better, and cure quickly. They are more durable, more resistant to many types of damage, and have improved aesthetics. Warehouse floor coatings of today provide higher value for money than before.

Taken for Granted, but Not Forgotten, Warehouse Floors

When floor coatings perform well, they do so silently. Good floor conditions allow for unimpeded pedestrian and mechanical traffic. The coating system is a silent workhorse that protects floors better and preserves floor quality longer. When no cracks, tears or adverse floor conditions cause skids, slips or accidents from happening, then the warehouse floor coatings system is doing its job quite well.

The key is in choosing the right coatings based on the types of hazards that warehouse floors are commonly exposed to. Commercial and industrial facilities have their warehouses exposed to chemicals, corrosive and abrasive agents, and load impacts. Resistance to such damage agents is essential. These coatings should also stand up to varying environmental conditions such as cold and hot temperatures, water intrusion and soaring humidity.

The Right Paint for Warehouse Floors

Painting contractors today specify and use floor coatings that are a product of modern paint technology. Improved chemistries have increased the adhesive bonding and imbued coatings with excellent resistance against most damage catalysts. Why go for already obsolete technology that can no longer guarantee a failure-proof coatings application? Even raw materials used to manufacture modern paints have been enhanced to increase the performance of warehouse floor coatings.

In today’s culture of information-sharing, paint manufacturers are also releasing results of laboratory performance testing done to their products. This has also become a good source of information for facility managers and painting contractors to better assess the coating quality prior to actual purchase.

Technology enhancements may be a given criteria in choosing the best warehouse floor coatings, but this must meet halfway with the facility’s own unique performance criteria. Ease of applicability, high tolerance to the environment, and paints that improve floor appearance are also a must.

Also important is the facility’s preference for environment-friendly warehouse floor coatings that are VOC regulations-compliant and do not release hazardous substances to the environment.

Conclusion

It is very important to restore floor coatings back to their good condition when they fall to damages, to avoid interruptions to facility operations and pose safety risks to facility occupants. Chemistry-modified coatings offer better performance than old paints. Facility managers are given more options to choose from, but they must keep in mind that practical requirements such as ease-of-use, cost, and the specific need of the facility’s warehouse are still relevant factors to consider.

A Guide to Concrete Floor Coatings Selection

To select the best industrial concrete floor coatings for your facility, the first thing to c0onsider is the criteria to be used in your selection. Nearly all types of flooring requirements can be addressed by various industrial concrete floor coatings systems. Identify the requirements for your specific floors, which can be any of the following:

1. For repair and protection. Many floor coatings options cater to floor maintenance, repairing damaged surfaces, and offer protection from various types of floor abuses, such as chemical spills, abrasive impacts or physical loads, to name a few.

2. For quality performance and durability. Industrial concrete floor coatings contractors can install high-performance floors that last for long periods of time. The thickness of coatings used, plus the type of coating product applied, can vary the strength and durability of installed floor coatings systems.

3. For beautifying drab-looking floors. Industrial concrete floor coatings can transform floors in any areas of the facility — employee lounge, shop floors, loading bays, among others.

4. For cheaper and practical floor solutions. When you’re after a minimum amount of expenditure for your industrial floor project, this is possible with industrial concrete floor coatings that are less expensive but still perform well, fitting your budget and project requirements at the same time.

Concrete Coatings for Floor Repair

When signs of floor damage appear, facility managers should waste no time in replacing the industrial concrete floor coating system. Putting off the work will result to negative consequences such as:

1. Unsafe floorings that may lead to potential accidents for building occupants, due to uneven floors, low-friction or non-skid-resistant surfaces.

2. Dirty-looking floors despite constant cleaning.

3. Unhygienic floors that encourage the growth of harmful bacteria lodging in difficult-to-clean floor cracks.

4. Worsen floor damage as time goes by.

Epoxy-based fillers may be applied to level the holes and remove unevenness in surfaces. For deep cracks, sand or quart-mixed epoxy fillers will have to be used fill the bottom. For hairline cracks, sanding will remove coating unevenness and blend the edges to make banish the crack. In cases of large cracks, repairing the floor foundation is necessary before any coating system can be installed.

Concrete Coatings for Floor Make-Over

Industrial concrete floor coatings transform facility floors back to their original look. You can choose from any of the following, based on your unique requirements:

1. Glossy coatings. Clear epoxy gloss is standard choice for floor beautifications. The colorless formulation can hide tiny floor imperfections.

2. Satin coats. Shark-grips mixed in industrial concrete floor coating lend a rough texture to the floor, leaving the top coat with a satin sheen that hides minor damages, and makes for easy-to-clean and skid-resistant surfaces.

3. Colored chips. Multi-hued chips applied on still-wet top coats can enhance the look of floors. The chips are broadcasted in measured amounts and certain distances from each batch, or applied using a pail with holes in the bottom, to achieve the right chip density and appearance on the surface.

The choice of the most appropriate coating product has to be a careful balance of monetary considerations and practical or functional requirements.

When cost is the biggest factor in coatings selection, facility managers must remember to insist on quality and good performance. Cost-savings that sacrifice quality is useless, due to further repairs and rework needed in the future.

Is Your Epoxy Garage Floor Coating 100% Solid? Does it Matter?

Not every epoxy garage floor coating is the same and with garage flooring, like many other things in life, you don’t always get what you think. When learning about something new, such as garage floors, it’s not hard to skip some features which may be important to you, especially if you didn’t even know they existed. For example, let’s examine a lesser known epoxy paint specification that may still be very important to you. Let’s take a look at the idea of an epoxy coating’s percentage of solids.

Percentage Of Solids? What Does That Mean?

Obviously all epoxy garage floor coatings start in a liquid form. Otherwise there would be no way to put it on the concrete garage floor. The term “percentage of solids” is an indication of the amount of the chemical mixture that will be solid in the end. To understand this, think about an epoxy adhesive. When you use epoxy adhesive, it’s completely solid when it dries, with no evaporation. In the case of an epoxy coating, though, this might not work quite this way.

But Where Is The Percentage Of Solids Listed?

Like most companies, regardless of the products they produce, the manufacturers of epoxy garage floor coatings tend to leave out any specifications that their product does not excel in. This makes it harder for the consumer to know if he is getting the appropriate product. In general, those epoxy coatings that are not 100% solid won’t tell you in so many words. Instead, they will be referred to as water, or acrylic based. Of course, any epoxy garage floor paint that is 100% solids will generally advertise it quite proudly.

Do I Really Need An Epoxy Paint Blend That Is 100% Solid?

You really, most likely, do not. However, you might miss the extra solidity if you ever drop a tool onto your nice, shiny, painted floor. Most people use some sort of garage floor covering on their paint to keep it nice looking, so they’ll never even notice that they’re using one of the many garage floor finishes that are water based. However, there’s just not that much of a difference in price between 100% solid, and the watered down epoxies. Some water or acrylic based paints even cost more than epoxy blends that are 100% solid. This is one of those industry secrets that probably wouldn’t be considered socially acceptable if the general public even knew.

Why Every Epoxy Garage Floor Coating Is Not 100% Solid

The most likely reason is profit margins. Any successful company makes the least expensive product and sells it for as much as possible, while not risking their reputation. So, if they can water it down a bit, charge the same amount, and have people buy it and be happy with it, then why not? Does this mean that you should avoid all water based epoxies on principal? Well, that’s where you have to make your choice. Do you go with the little guy who doesn’t have the reputation but promises a better product for less, or do you buy from the big name and hope you don’t notice the difference? When shopping for an epoxy garage floor coating, like many other things, it really just depends on the type of consumer you are.